Recent Comments

How to Make a Fast Pinewood Derby Car

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

Packs nationwide are gearing up for their annual Pinewood Derby. There are a variety of ways to make your Pinewood Derby car go faster. Explore the following tips to optimize your car’s performance and gain a competitive edge in an upcoming race.

BASIC GUIDELINES FOR PINEWOOD DERBY CAR DESIGN

The possibilities are endless when it comes to picking a shape for your Pinewood Derby car. Before you begin, consider the following general guidelines:

Avoid Pointed Noses: A pointed nose will make it difficult for your Pinewood Derby car to rest on the pin at the starting gate. It may also cause your Pinewood Derby car to get bumped around when the pin drops, and it can create problems for electronic timing systems at the finish line.

Weight Distribution: Leave ample wood in the rear of the Pinewood Derby car so you can place additional weight there. Concentrate the majority of the weight in the rear for optimal performance.

Maximum Weight: Aim for the maximum allowable weight, typically limited to 5 ounces in most races. If your car falls short of this weight, strategically add coins or other weights to meet the requirement.

Clarity in Orientation: Clearly distinguish the front and back of your Pinewood Derby car. In many races, the race officials — not you — will actually place each Pinewood Derby car on the track. Sometimes the officials put the Pinewood Derby car on the track backward because they can’t tell which end is which.

Aerodynamic Design: Select a design that facilitates smooth airflow over and around the Pinewood Derby car body. Pinewood Derby cars with aerodynamic profiles go faster.

See photo galleries of hundreds of Pinewood Derby car designs.


10 STEPS FOR DESIGNING AND BUILDING YOUR PINEWOOD DERBY CAR

You don’t have to strive for the fastest Pinewood Derby car to have fun competing in your Pinewood Derby. But if you and a helpful adult are willing to put in the extra time and effort, these tips are for you.

1. Bake the Block: Start your Pinewood Derby car project by baking the wood block at 250 degrees for two hours. This removes moisture and lightens the block, allowing you to place more weight at the rear of the car where you actually want it.

pinewood-aero

2. Crafting the Design: Outline your Pinewood Derby car on paper, cut it out, and affix it to the wood block.

Remember, a rectangular car is not an aerodynamic design. The most basic aerodynamic design is a simple wedge. If you don’t have time to design a complex car, a wedge will work just fine.

Download a Pinewood Derby car template PDF to help you create your design.

3. Rough Cut the Design: Use a coping saw or enlist the help of a responsible adult with a power tool to cut out the rough shape of your Pinewood Derby car.

4. Shape Your Car: Smooth edges and shape your car using sandpaper. An adult can assist with a rotary tool or other shaping tools.

5. Sand and Paint Creatively: Reduce friction by smoothing the car’s surface and paint an awesome design to make it look great.

How to paint your Pinewood Derby car to give it a shiny finish.

6. Axles and Wheels Alignment: Make sure they are aligned perfectly straight. You can test the alignment of your axles by pushing your car across a smooth floor or table. It should roll smoothly in a straight line.

— Consider a Three-Wheeler: Raise one wheel about 1/16 inch higher so it never actually touches the track. Less friction = more speed. Rules vary from pack to pack, so make sure to check your pack’s Pinewood Derby rules to make sure three wheelers are allowed in your race.

— Extend the Wheelbase: Maximize the distance between front and rear wheels. Again, make sure this is allowed in your race.

Learn about polishing Pinewood Derby axles and wheels to reduce friction.

7. Secure Axles with Glue: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels.

8. Strategic Weight Addition: Remember to make your Pinewood Derby car as heavy as the rules allow. In general, it’s best to place weight to the rear of your car because a heavier rear increases speed.

Learn scientific Pinewood Derby speed tips from a former NASA engineer.

9. Use Graphite: Add graphite or another dry lubricant to reduce friction. The less friction between the body and wheel, the better.

10. Have fun! And finally, remember the most important rule of a Pinewood Derby is that it’s supposed to be fun. While you should always strive to do your best, don’t get caught up in winning or having the fastest car. Just enjoy the ride.

Adapted from the book “Pinewood Derby Speed Secrets,” DK Publishing, $12.95 softcover.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

50 Comments on How to Make a Fast Pinewood Derby Car

  1. HOT-DOG CARS ROCK!!!! 🙂

    MAKE ONE!!!!!

  2. Last year I beat everyone in my school and opposing school and got the GIANT TROPHY!

  3. Webelos Den Leader // January 7, 2009 at 4:13 pm // Reply

    To many of these races are being won by DAD BUILDT cars. Remember this is for the boys. Dads only help!!!!!!!!

  4. Our council forbids 3-wheelers; I believe most councils do. You can buy axles (nails) in bulk from various on line stores. I believe the car (including axles, wheels etc) needs to be crafted by the cub scout with some help and guidance from an adult (especially when safety is a concern). Buying pre-made cars or professionally modified parts on line defeats the purpose of this exercise and definitely sends the wrong message to your scout and others.

  5. Thank you for sending your tips in. They are very help full. Heres one, Bake your car at 250 degrees for 2 hours.

  6. your cars are the coolest .My pine wood derbyis cool to plese

  7. Cub Master Mike // December 19, 2008 at 11:21 am // Reply

    If you have to take your wheels and axles to a Machine Shop to make them faster then you have forgot the meaning of scout fun the idea is to make it with your son and use the tools that would be found in any garage not a machine shop.

    If you buy it over the internet then you still don’t get the point.

  8. those coments are cool

  9. nothing worked

  10. Well said Derby Guy

  11. my brother has past all the ranks in all scouting. he very rarey lost any races all thanks to his pinewood derby secrets. he still has all his cars in a glass boxes. i stink at making fast cars! for some reason i allways win space derby. bye guys! big-d

  12. WHAT HE SAID

  13. It is a little silly to suggest making a car from 20 axles when 4 come in a kit. Buying 5 kits is over the top.

  14. Dist Commish // October 9, 2008 at 10:30 pm // Reply

    I like the tips and have used most of them with success. However, I strongly disagree with extending the wheelbase. I believe the stock axle position should be mandatory. Not all parents have the ability or the tools to re-locate axle slots.

  15. ABC are selling cars are ready to race right out of the box. Each car is tested on there track. they can’t guarantee that your car will win but it is very fast. These cars are selling fast. What a farce…

  16. thanks for the tips

  17. build a mini pick up my son tryed it and it won 1st place

  18. Cub Scout 530 // May 30, 2008 at 10:35 pm // Reply

    These are some useful tips

  19. Anonymous // May 29, 2008 at 9:36 pm // Reply

    weve been trying to get a better car thanks ill try it when it comes

  20. hey thanks for the tips, i never knew abou the “3” wheeler thing until now and im sure to beat my classmates in physics! thanks again for the advice

  21. Please reconsider some of your tips. My scout used tip #5 – Extend your wheel base. We had to move them at the council race because they were further apart than permitted. As a result the wheel wasn’t very secure and wobbled/rubbed agains the car.

  22. I came up with a speedy design nicknamed “Hawkspear” its 6 and a half MPH

  23. Past car racer // April 12, 2008 at 12:52 pm // Reply

    Don’t put the axles in all the way let the car teter it makes it fast

  24. My car is going to win

  25. I loved the pinewood derby when I was in cub scouts.Now I’m a boyscout.But you do alot of fun things in boyscouts.GOODLUCK to all of you.

  26. Why do they have to put lead under the cars? Does the weight give it better stability and speed? The first Pinewood derby race I did, they filled an entire hole full of lead, and I won first prize.

  27. can you grease the wheels when you’re making adjustments to your car?

  28. a dog a yo yo // March 25, 2008 at 10:59 am // Reply

    i looked in the book of the rules you can put there wheels. It’s just evebody thinks its not aloud but it is. My son made one and it won first in the pack and first in Arizona.

  29. yo72witha what what // March 25, 2008 at 7:01 am // Reply

    I won 2 in state go tips

  30. hey blue lightnig dude! my design isn’t blue lightnig. But it’s as fast as you say your’s is!

  31. I have a secret design no one will see it coming!

  32. Cub Master North Star // March 21, 2008 at 1:31 pm // Reply

    These are great tips! The big thing to remember is that this is for the boys. Dad’s, HELP the boys don’t build the cars for them. They must learn on there own, guide them, that is how they grow. I always sugest and have a race for dads and tag alongs! Remember to check with your district an cub masters for the rules and guidelines!

  33. thanks for the help

  34. cool kid 98 // March 13, 2008 at 7:42 pm // Reply

    I’m glad they gave hints

  35. Crystal Scouts // March 9, 2008 at 5:03 pm // Reply

    Is it legal or not to extend the lenght of your wheel base on you Pinewood Derby car? The car has grooves where the axles go when you recieve the car in the box.

    It isn’t clear in the Kit instructions?

  36. leanonspeed // March 8, 2008 at 12:35 am // Reply

    can the car be built with just 3 wheels?

  37. shadow2000 // March 6, 2008 at 7:09 pm // Reply

    Hey! I am making a peanut car.

  38. donald duck98 // March 2, 2008 at 12:28 pm // Reply

    hey i won the race going backwards

  39. I used these tips and i won 1st place speed in pinewood derby.

  40. I already know these hints.

  41. donald duck98 // February 23, 2008 at 12:35 pm // Reply

    hey i’m making a ufo for a car what are you making?

  42. Blah Blah 444 // February 22, 2008 at 8:44 pm // Reply

    That is so cool!!!!!!!!!!!!!!

  43. Hey, I got a funny storie. I went with my freind to a derby once and i had to use his car from the year before because i wasn’t even in scouts(I’m a tenderfoot now) and i won first place against him!

  44. BlueLighteningDude // February 22, 2008 at 9:43 am // Reply

    No you can’t, wizland! My cars were Blue Lightening (last year) and this year Blue Lightening II. BUT! The first car I made in Webelos 2. In my (or my little brother’s now) pack if you have a little brother in cub scouts then you can race in the “unlimited” section.

    BlueLighteningDude

  45. I was reading and flipping the pages of Boy’s Life Magazine when I got to the page with the picture of the wooden and painted Pinewood Derby car and that reminded me that the Pinewood Derby was coming up. I noticed that the page had Speed Secrets printed on it, so I asked my dad if I could do my Pinewood Derby car right away!Luckily he said yes. When the car was finished, I waited a couple of days, until the Pinewood Derby started I got FIRST PLACE!!!and I only got in second once during the whole entire race!(not including the championship race but I was in the championship race) for Bears in 2008. You should really try these speed secrets!

  46. Where can I get several axels to choose from? Somebody help me quick!!!!!

  47. AWESOME!! LUV IT

  48. Hey, blah. You can still be counted in with Webelos 2 if you’re in boy scouts. (:

  49. Thanks for the tips. I won 1st place last year and i’m hoping to win again.

  50. awesome tips they really helped me

Leave a Reply to Bry Cancel reply

Please don't use your real name.