Recent Comments

Make the ultimate raingutter regatta racer

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

A winning raingutter racer stays on an even keel, moves in a straight line, keeps the bow above water and does not drag.

If your boat does all this, it finishes ahead of any boat that can’t. Here’s how to build your winner.

WHAT YOU’LL NEED

  • Regatta Kit (BSA Supply No. 17090, $3.99, http://www.scoutstuff.org)
  • Fine sandpaper
  • Scissors
  • Polyurethane
  • Paintbrush
  • Superglue
  • Spray paint (optional)
  • Adult permission and/or supervision

WHAT YOU’LL DO

step1.jpgStep 1: Sand the balsa wood hull’s sides and bottom until smooth.

step2.jpgStep 2: Put the mast in, and bend back the mast to “rake” it a little. Take the mast out for now.

step3.jpgStep 3: Seal the hull, using two coats of polyurethane, then sand it smooth.

step4.jpgStep 4: Add the keel and the rudder. Put both on the centerline and at right angles to the bottom of the hull. Put the keel on as far back as you can, just ahead of the rudder.

step5.jpgStep 5: Glue the keel’s narrow edge next to the hull and the angled edge forward. This makes your boat harder to tip and quicker to right.

step6.jpgStep 6: If you paint the boat, keep it simple — spray paint works fine. Three thin coats make an attractive finish. Attach the mast after painting.

step7.jpgStep 7: Trim 1/4 inch off the top and 3/4 inch off the bottom of the sail. Cut a new bottom hole 1/2 inch above the old one. Clip off the bottom corners so they can’t snag the gutter.

step8.jpgStep 8: To keep the sail above the gutter, attach it so that the bottom is 1 1/2 inches above the deck. Glue the sail to the mast so that it can’t move. Attach the sail at right angles to the centerline.

HOW TO CAPTAIN THE BOAT

No matter how well you make your boat, victory demands a skilled captain. An even wind, for instance, moves the boat faster than do frantic puffs.

Practice long, steady breaths. Your breath should hit the sail directly behind the sail and just below the center.

no.jpgIf you’re too high, blowing downward, you will force the bow down, slowing the boat. You’ll blow your chance to win.

yes.jpgPosition yourself so that you are blowing from behind the boat and slightly up, using a gentle, steady breath.


Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

11 Comments on Make the ultimate raingutter regatta racer

  1. CrushYourBones // July 24, 2010 at 3:53 pm // Reply

    Our pack is only allowing a 3/4 inch depth. What is the BSA rule concerning depth?

  2. What if we spray paint it? Will that help? Is that good enough or not? Does it “have to” be polyurethane? We just came back from a Webelos Extreme campout and the regatta is tomorrow. Thanks for the good info,though!

  3. followed these directions and my two kids won 1st and 3rd place in the pack competitions – even against one catamaran style boat. making the sail smaller and keeping it up high really helps, as does using the Polyurethane.

  4. My son raced this design and took first place. He even won against a catamaran design. Really made his day. Thanks!

  5. this is good to know.

  6. nj den leader // June 7, 2010 at 7:37 am // Reply

    My son and his friend both used this design and took first and second places in our pack’s regatta this past weekend. Thanks!

  7. i got fisrt place and i got the world cup

  8. awsome boat in the picture

  9. I won with a catamaran style

  10. cool.
    I’m doing it.

Leave a Comment

Please don't use your real name.