How to Make an Origami X-Wing Fighter

Fold your very own Star Wars X-Wing ship! Follow the instructions in the video above, or use the following step-by-step instructions to make an origami X-Wing fighter.

WHAT YOU’LL NEED

• One square sheet of origami paper (the larger the sheet, the easier it will be to fold)

WHAT YOU’LL DO

Step 1: Start with square, color side up. Fold diagonally both ways. Unfold.

Step 2: Flip paper over. Fold in half side to side. Unfold.

Step 3: Fold in half, top to bottom.

Step 4: Squash fold both sides. (Hold top corners, and pull down and inward.)

Step 5: Pull up center crease.

Step 6: Your paper should look like this now.

Step 7: Fold and unfold right panel.

Step 8: Squash and flatten.

Step 9: Fold right panel to the left.

Step 10: Slightly open flap to the right and squash and flatten.

Step 11: Flip over.

Step 12: Repeat steps 7-10 on back two panels.

Step 13: Fold toward center. Unfold.

Step 14: Pull up on center and fold up as sides come in. Flatten.

Step 15: Repeat steps 13-14 on all four sides.

Step 16: On two opposing sides, fold down point as shown.

Step 17: On a side with point up, inside reverse fold the legs out to make two wings. Repeat on opposite side to make two more wings.

Step 18: Fold the right edge to the center. As you are folding the right edge, the bottom edges should fold together.

Step 19: You fold should look like this once flattened. Repeat step 18 on all four sides.

Step 20: Once all four sides are complete, take the right side and fold over to the left. Repeat on back.

Step 21: The bottom triangle flap should no longer have a split in the middle.

Step 22: Fold the bottom triangle flap up toward the middle. Repeat on back.

Step 23: Inside reverse fold the tips up. Repeat on the other side. You’ll have a total of four to complete.

Step 24: Fold the right panel over to the left. Repeat on other side.

Step 25: Your Star Wars X-Wing is complete!

PHOTOS OF COMPLETED SHIP

Check out these photos of the completed X-Wing Fighter sent to us by Scout Life readers. If you have a photos of a SL Workshop project, please use the form below to send it to us.