Recent Comments

Make a suit of chain-mail armor

SAFETY FIRST: Ask an adult to help with tools you haven't used before.

armor_main2.jpgTwo leather-clad warriors face each other, swords drawn. Suddenly one of the warriors attacks, his swinging sword clanging loudly against the defending warrior’s. Back and forth they cut and parry, the meadow ringing from impacts. Suddenly the attacker sees an opening and takes a swing he knows will surely cut his opponent in two. His sword slices through his enemy’s leather clothing—but strikes metal instead of flesh! Stunned but far from dead, the attacked warrior says a silent prayer of thanks to the armorer who had saved his life by making him a coat of chain mail.

The Scouts in BSA Troop 324 at European Command Headquarters in Stuttgart, Germany, don’t plan on being in any sword fights. But making their own suit of chain-mail armor can transport them to the days of shining knights, if only for one fun afternoon. Here’s how you can join them.

You’ll Need:

• two 500-foot rolls of 14-gauge copper wire

• electric drill with 3⁄4-inch bit and 1⁄8-inch bit

• wire cutters

• hammer and nails (long enough to secure wood together)

• wood saw

• wood glue

• 3-foot-long wooden dowel, 3⁄4-inch in diameter

• 7 feet of lumber

• adult’s help and/or permission

armor_step1_2.jpgSTEP ONE: Build a Wooden Rack

A rack or frame will make it easier to produce the many rings needed in a shirt of chain mail.

1. Cut the lumber into three 1-foot-long pieces and two 2-foot-long pieces. Set one 1-foot piece aside.

2. Through the center of two 1-foot pieces, drill a 3⁄4-inch hole. Move the drill bit around to make the holes slightly larger, so the 3⁄4-inch dowel easily slides through.

3. Build the rectangular rack with the two 2-foot pieces and two 1-foot pieces with holes.

4. Slide the dowel through both holes.

STEP TWO: Add a Crank

1. Cut 6 inches off the wooden dowel.

2. Drill two 3⁄4-inch holes into the 1-foot piece of lumber set aside in Step One. Drill the first hole about 2 inches from one end, the other hole about 4 inches from the other end.

3. Take the longer dowel piece and glue into the hole drilled 2 inches from one end.

4. Take the 6-inch dowel piece and glue it into the hole drilled 4 inches from the end, on the opposite side of the lumber. This will be your crank handle.

5. Insert the crank fully into the rack. It should turn easily. About 1 inch from the inside edge of the rack, drill a 1⁄8-inch hole through the center of the dowel.

6. Set aside to let glue dry.

STEP THREE: Ring, Ring, Ring

armor_step3_1.jpg1. Insert one end of the wire into the hole in the dowel and begin turning the crank. Keep turning until the entire length of the dowel has a single layer of tight wire coil. Cut the wire from the roll.

armor_step3_2.jpg2. Cut the piece of wire that was inserted into the hole to begin the coil. Now you should be able to slide out the crank from the coil and the rack, leaving you with a coil of wire. Slightly stretch the coil.

armor_step3_3.jpg3. Cut the rings from the coil. This should leave you a pile of rings that are just barely open. Make more coils and cut more rings.

armor_step3_41.jpg4. Take 4 rings and twist the 2 ends together to make a closed ring. Put these 4 solid rings onto a fifth ring and close this fifth ring so you have a group of 5, four rings on one. This “fiver” is the basic building block for the chain mail armor.

5. Make a large pile of fivers. Also keep a large group of slightly open single rings. When you have a good pile of each, it’s time to begin building the armor.

STEP FOUR: Knitting the Shirt

armor_step4_1.jpg1. Take a fiver and lay it flat, moving 2 rings to the top of the center ring and 2 rings to the bottom. Do the same with another fiver and position it below the first fiver.

armor_step4_2.jpg2. Take a single open ring and link the bottom 2 rings of the top fiver to the bottom 2 rings of the bottom fiver. This single ring now links 4 other rings, just like the fivers you have already made. Close this open ring. Even at this early point the rings should

show a pattern, tilted up and tilted down as they rest upon each other. Add 2 more fivers to form a strip of four fivers. Make another strip of 4 fivers.

armor_step4_3.jpg3. Lay a fiver strip flat to the right side of the first fiver strip. Take a single open ring to link the right 2 rings of the top left hand fiver in the strip to the left 2 rings of the top fiver in the right-hand strip. Continue to link the fivers as shown.

4. Hold up the linked fabric. You can “scrunch” the fabric easily in only one direction. Continue to build a large rectangular fabric. The direction of “scrunchiness” goes about the waist.

5. Once the fabric can comfortably circle your torso, with some slack, attach the 2 edges to form a cylinder.

6. Make two strips, at least 3 groups wide, that will attach to the top of the shirt. These will go over your shoulders. When you are done you should be able to put the shirt of chain mail over your head and have adequate area for your arms.

7. Small cylinders of links can be added to make sleeves. Links can also be added to lengthen the shirt, or different colored metal links can be added to decorate the bottom edge of the shirt.

Submit a Photo of Your Project

Important Note: Please only upload photos of your project. Because of privacy rules, we can't post any photos that show people's faces. Always ask for your parent's permission before uploading anything to a website.

66 Comments on Make a suit of chain-mail armor

  1. I posted this on // August 6, 2015 at 2:35 pm // Reply

    how long does it take to make it

  2. does it weigh alot

  3. Looks cool, but where do you find the copper?

  4. just a suggestion // December 5, 2013 at 10:27 pm // Reply

    What if you made these curls and then spin them together without cutting that would make it less time consuming… although less mobility, so never mind that. I will try this by making large circles and then underline it with smaller ones.

  5. StarScout223 // June 19, 2013 at 4:52 pm // Reply

    This seems very time consuming.

    • Warlord Blasius // June 3, 2015 at 11:38 am // Reply

      Hey chain mail can save your life and divers wear it against sharks it prevents the teeth from getting to their skin or at least hurting them badly
      though I do agree with you it does take time

  6. Let me say this: I know a man that made a real shirt of chain mail. it was out of heavy steel wire and took him a year to make the shirt. Each link in it is about the diameter of a cheap pen.

  7. that smart chick // April 8, 2013 at 11:19 pm // Reply

    If you wanted to, you could use jewelers rings. Theyre pretty common and can be
    found anywhere beads are sold. Also, they are sold in bulk and come in a lot of different metals.

  8. This is SO cool and I am SO trying it

  9. real chainmail has smaller spaces in between the links, and smaller links, too.

  10. you can take the links and form them into one long chainto make a necklace. I reccomend threading a bead on to a wire and bending that wire into a cool shape.

  11. i am so doing that

  12. sounds awsome

  13. now I can look menacing to my friends if I choose to.

    • the problem with that is that you’d likely be made fun of for looking like a nerd. now don’t get confused i’m a nerd myself, but doing something like that could get you bullied.

  14. This seemes cool I might try it.

  15. don’t use anything greater than 3/8 inch dowel as the copper links will not be able to hold the strain of the weight of the mail. For a hood/coif I would suggest 5 triangles of mail or an expanding circle. You could hit the “Armour Archive” for more info. Or search of how to make chain mail for other site.
    Step 7 beware you will either need to expand/contract the mail at the armpit for full movment.

  16. This is great! I was looking to make a suite of samurai armor, and they use a lot of chain-mail in those sets. This’ll help.

  17. superscout // July 11, 2012 at 9:32 am // Reply

    This is cool and all but how much does this cost?

  18. Mythical Films // March 10, 2012 at 1:57 pm // Reply

    Great, now I can make mail armor for my Zelda movie!

  19. lololollololololoo // January 18, 2012 at 12:31 pm // Reply


  20. for my school’s rennaisance day i mad chain mail armor, but quite differently. for the year before I collected as many pop can tabs as i could, and then wove those together with copper wire. I only got the front and i still have a full shoebox of tabs!

  21. why not just use steel wire?

  22. what else can we use to make the armor

  23. how do u make a helmet with it?

  24. this is a good try but you can’t use 3/4″ dowel!What you need is pencil thick wood!The 3/4 chain mail looks like hot garbage.

  25. lego8129034 // July 10, 2011 at 10:51 am // Reply


  26. Instead on using the contraption out of wood to make the coils, you can just drill a screw into the end of the wooden pole with an electric screwdriver and leave the screwdriver running to make the pole spin with the wire coiling around it.

    • Charliehorse // November 18, 2011 at 5:57 pm // Reply

      I have been making maille for years and have used different processes for making rings. I can tell you that leaving a power drill running for this is a bad idea. You have to guide the wire into position, so you need to be able to stop turning immediately, otherwise the wire will wind backwards over your coil.

  27. Belive it or not the chinese bought a whole boatload of copper so much that copper prices have been skyrocketing a doller every year.

  28. coolman555 // April 7, 2011 at 5:46 pm // Reply

    I think it took an experienced armor maker about 1 month ,but if you try to build one nonstop that includes not sleeping ,eating or anything then you could build one in a day or 2.

  29. how long did it take in the middle ages to make a suit out of chainmail?? please help me, its for school

    • In the dark ages that you are referring to, a blacksmith himself wouldn’t actually touch chainmalle himself as he would have a dozen or so apprentices learning the craft under his watch. With that many hands, a “suit” of chainmalle would take approximately a day. Now a suit of chainmalle was very uncommon as most armor was either plate or leather and chainmalle was reserved as a coif, hauberk, or full tunic that ended around the knees. That said, you’d be looking at 2-3 pieces for a suit of chainmalle.

    • about 5 days

  30. Isn’t copper expensive? But it does work very well, and besides, are you planning to make a sword and a helmet to go with it? I mean it’s not like you are planning to go use it in a real sword fight. but if you do actually use steel or something, us copper to make like a cross or something in the middle of the chest, it looks cool because the copper is a different color.

    • jamesengle // March 1, 2011 at 2:31 pm // Reply

      actually Jewelers wire is fairly inexpensive in large coils and easy to come by

    • Copper is fairly expensive as is raw iron that is historically correct. A fairly accurate and cheap version, if 14ga is indeed what you want, would be galvanized steel. It’s heavier but will give you a much better feel for how difficult it was to produce and how strong someone had to be to don this armor effectively. You can get galvanized steal wire at your local hardware store for around $14 a spool of 10-25ft or $32 for 100 Ft.

  31. DuckTapeManiac // February 26, 2011 at 1:22 am // Reply

    I am so making some armor.:)This is so cool.

  32. how long does it take?

    • My tunic took about 2 months of free time to produce from making rings to assembling them. The best armor would have each ring welded or riveted together making it take longer but butted rings (Just closing them) should be sufficient for your project.

  33. Good idea, tony b. I want to try this. I am really into knights. I am even writing a book about knights.

  34. duct tape master // January 10, 2011 at 10:22 pm // Reply

    hey coyote guy you can make battle gloves helmets n swords n stuff just not the way you think

  35. The Real Potato!? // December 28, 2010 at 10:23 pm // Reply

    As pickle said its meant to go cross ways but if you want to be practically invulnerable go length ways with 14ga fencing wire (please keep in mind this will greatly increase the weight of the suit but easily compensated with a belt to take some of the weight off of the shoulders. For best results using this method use an 8mm or 9mm rod to manufacture your links, using a rod this size means the space between links is relatively tight but still flexible. Hope this helps =)

  36. Whoever came up with this is a genius!

  37. I wonder if you can make battle gloves and helmets…

  38. I really want to try this: but more than once with a different material each time. Then I’ll show my scout troop how!

    • By the time your done with the first one, you wont want to do it again because of the amount of time involved for each person. To teach your scout troop, I highly recommend something small like bracers (a common chainmalle item) that wont get real heavy and can be produced in a single afternoon.

  39. sweet i can use my paws scrap metal for something

  40. Cool! I might try making some.

  41. this stuff is really cool it’l be awsome to sword with me brother but true it does take awile

  42. If you get in a fight It sure would be useful

  43. The Man with the Banjo // August 16, 2010 at 6:07 pm // Reply

    you could also make chains for other things. 😛

  44. armor is sup[posed 2 go crossways not lengthwise and if u reelly want to use it and hav it not weigh 20 pounds then make it out of 16 guage aluminum

    • Aluminum is one of the most expensive alloys on the market today. While it is much lighter, you’ll pay more per oz for that luxury. It’s also much less giving to those who aren’t strong enough to work with the cheaper materials to begin with.

      There are many ways to make armor so don’t knock one method just because you feel it is wrong. It’s like saying there is a right and wrong way to make a paper airplane.

  45. I use 14ga. electric fence wire. I like it because it is a mild form of stainless steel light but strong does not rust and can be polished like silver jewlery if you don’t like dull gray.I also use a 3/8″ steel rod for the winder by puting 2 bends in it to make a crank handel. TIP:put the coil on a flat surface and roll a sharpie marker down the side of the coil and it will leave a small dash so you cut even this before you stretch the coil. Hope this helps some of you to do this project.

    • Using tin snips on your wire will yield many rings just fine without stretching the coil to produce uneven rings. If you have a few extra $$ laying around, pick up a pair of hand bolt cutters that work on up to 10ga just fine.

Leave a Comment

Please don't use your real name.